General Surgery Table Guide:

MedRecon can rebuild any general surgery table regardless of age, make and model, including the ability to customize any of these tables to suit your operating room or surgical suite.

Skytron 6500 Elite OR Table
Skytron 6500 Elite OR Table
» More Information
  • Weight Capacity: 500lbs lift & articulate capacity
  • Minimum Height: 26"
  • Maximum Height 47"
  • Return-to-level
  • Power kidney bridge
  • Removable leg section
  • Durable one-touch pendant control
  • Top Rotation: 180°

This Skytron OR table provides remote control C-arm positioning capabilities for a wide range of procedures, with a return-to-level button. 180º top rotation, electro-hydraulic floor locks and a 500lb weight capacity to lift and articulate. The leg section is removable. Position capabilities to include: lateral tilt of 30°, (body elevation of 5” built-in kidney bridge) back up of 90°, back down of 40°, height adjustment range of 26” to 47”, leg section down 105° leg section up 20°, trendelenburg and reverse capabilities.

Contact MedRecon for pricing » Close
Amsco 3080 General Surgery OR Table
Amsco 3080 General Surgery OR Table
» More Information
  • Load Limit 500 lbs. lift and 400 lbs. articulating
  • Height Maximum 44"
  • Height Minimum 27"
  • Trendelenburg 25°
  • Reverse Trendelenburg 25°
  • Lateral Tilt 18°

The Amsco 3080RL table is a fully radio-translucent, remote control operated surgery table with return to level capabilities. This unit offers manual backup controls, as well as optional battery backup or foot control capability. It can be utilized for all types of procedures, including general, orthopedic, cysto-urological, neurological and vascular, with various accessories available. It comes standard with hand control, new pads, and standard headrest.

Contact MedRecon for pricing » Close
Shampaine Radi OP 1900 Remote Control OR Table
Shampaine Radi OP 1900 Remote Control OR Table
» More Information
  • Load Limit 350 lbs.
  • Height Maximum 44"
  • Height Minimum 28"
  • Trendelenburg 25°
  • Reverse Trendelenburg 25°
  • Lateral Tilt 17

The Shampaine Radi-Op 1900RC is a completely c-arm compatible general surgery table that offers head-to-foot table top slide capabilities to accommodate a wide range of fluoroscopic procedures. The standard accessories included with this table are a full set of conductive cushions and standard headrest. The standard features of Radi-Op tables include longitudinal sliding tops for increased c-arm and surgical access to patients, 4-inch kidney elevator, leg section that folds down and under 103 degrees, and precise positioning capabilities compatible with both ceiling mounted and portable image intensifiers.

Contact MedRecon for pricing » Close
Shampaine 4900 Remote Control General Surgery OR Table
Shampaine 4900 Remote Control General Surgery OR Table
» More Information
  • Load Limit 500 lbs lift / 400 lbs articulation
  • Height Maximum 44"
  • Height Minimum 28"
  • Trendelenburg 25°
  • Reverse Trendelenburg 25°
  • Lateral Tilt 18°

This Shampaine OR table offers fully remote control positioning with full c-arm access to accommodate the widest range of positioning requirements. Unit offers 500lb lift capacity, head to foot slide capability, electric hydraulic floor locks with self-compensating tripod design, dual perineal cutouts as well as standard positioning; trendelenburg, lateral tilt, back, leg, kidney and flex functions. Emergency override, optional foot control and a broad range of accessories provide safety and flexibility for virtually all types of procedures.

Contact MedRecon for pricing » Close
Skytron 5001 Elite OR Table
Skytron 5001 Elite OR Table
» More Information
  • Weight Capacity: 400lbs lift & articulate capacity
  • Minimum Height: 28"
  • Maximum Height 45"
  • Table Width: 20"
  • Lateral Tilt: 30°
  • Trendelenburg: 30°

This Skytron OR table provides remote control C-arm positioning capabilities for a wide range of procedures. It offers 30º lateral tilt, trendelenburg and reverse capabilities, 180º top rotation, electro-hydraulic floor locks, and a 400lb weight capacity.

Contact MedRecon for pricing » Close
Skytron 6001 OR Table
Skytron 6001 OR Table
» More Information
  • Weight Capacity: 500lbs lift & 400 lbs articulate capacity
  • Minimum Height: 28"
  • Maximum Height 45"
  • Table Width: 20"
  • Table Length: 75"
  • Lateral Tilt: 30°
  • Trendelenburg: 30°
  • Top Rotation: 180°

This Skytron OR table provides remote control C-arm positioning capabilities for a wide range of procedures. It offers 30º lateral tilt and trendelenburg and reverse capabilities, 180º top rotation, electro-hydraulic floor locks and a 500lb weight capacity. The leg section is one piece hydraulically activated and the kidney rest is optional on the Skytron 6001K models.

Contact MedRecon for pricing » Close
Skytron 3100 Remote Control OR Table
Skytron 3100 Remote Control OR Table
» More Information
  • Weight Capacity: 500lbs lift & 400lbs articulate capacity
  • Table Width: 19 5/8"
  • Table Length: 77"
  • Minimum Height: 29"
  • Maximum Height: 40"
  • Trendelenburg: 20°

This Skytron OR table combines remote control positioning, 400lb weight capacity and 23 ½" top slide function to provide one of the most versatile C-arm units available. It offers removable leg section, 20° lateral tilt and extending length top to allow for urological, vascular, pain management, orthopedic and other specialty procedures. Remote hand control operates all table function including kidney elevator, Trendelenburg, lateral tilt, raise, lower and self-compensating floor lock. Optional drain pan, stirrups and foot control accommodate urological procedures.

Contact MedRecon for pricing » Close
Amsco 2080 General Surgery OR Table
Amsco 2080 General Surgery OR Table
» More Information
  • Table Length 72"
  • Table Width 20"
  • Minimum Height 27"
  • Maximum Height 45"
  • Trendelenburg 20°
  • Reverse Trendelenburg 20°
  • Weight Capacity 350lbs
  • Height: 27 1/2" to 44"

C - Arm Modification for Amsco Tables
Increase the value of your Amsco Table by making it partially C -Arm compatible.

  • Remove the existing leg section.
  • Move the leg section support brackets to the outside of the table.
  • Install a phenolic radiotranslucent leg section with metal framework and a provision for an additional x-ray loop.
  • Make the leg section 3" longer to expand the viewing area. 34" Viewing area.
  • Provide a phenolic foot/head extension and a provision for an additional x-ray top.
Contact MedRecon for pricing » Close
Chick SE-2001 OR Table
Chick SE-2001 OR Table
» More Information
  • Weight Capacity 400lbs
  • Table Length 75"
  • Table Width 20"
  • Maximum Height 42"
  • Minimum Height 31"
  • Trendelenburg 30°
  • Reverse Trendelenburg 30°
  • Lateral Tilt 20°

Chick CST This stored energy table is completely c-arm compatible and can accommodate a wide range of procedures, including laporoscopy and cystectomy. All table movements are accomplished by either using stored energy or the manual override system. Electrical connection is 110V, but continuous electrical connection is not required because of stored energy design.
Chick CST-RC Remote Control This table is an upgraded version of the SE-2001. It offers the same stored energy design but additional remote control positioning with an infrared remote hand control and detachable remote foot pedal. This unit can be outfitted with a drain pan, stirrups, etc. to accommodate urology procedures, and they are fully c-arm compatible. No literature is available on the CST-RC so please refer to the SE-2001 for specifications.

Contact MedRecon for pricing » Close
Maquet 1130 Remote Control General Surgery OR Table
Maquet 1130 Remote Control General Surgery OR Table
» More Information
  • Table Length 80"
  • Table Width 21"
  • Trendelenburg 30°
  • Reverse Trendelenburg 25°
  • Lateral Tilt 20°
  • Weight Limit 500lbs lift

This table is a fully radioluscent, fully remote control, battery and line powered surgical table. It offers 500-lb. weight capacity, durable construction, retractable cord and the .02 model has return-to-level positioning. Unit is complete with standard headrest, solid leg section, full set of padding, built-in x-ray channel and standard functions; upper and lower back section movement, trendelenburg and reverse, lateral tilt left and right and leg up and down.

Contact MedRecon for pricing » Close
Midmark 7100 and 7300 General Surgery OR Table
Midmark 7100 and 7300 General Surgery OR Table
» More Information
  • Height: 27 1/2" to 44"
  • Trendelenburg and Reverse Trendelenburg: 28°
  • Lateral tilt: 18°
  • Back section: 28° (normal) 80° - 0° -105° (reverse)
  • Normal position coordinated: flex 220°, reflex 155°
  • Reverse position coordinated: flex 236°, reflex 124°
  • Leg section: down 105°, up 80° for chair positioning

These tables offers exceptional C-arm access for the widest range of C-arm applications including neurology, urology, orthopedics, OB-GYN and general surgery. Full body imaging and return to level features coupled with its remote control and battery operation make this table an outstanding choice for all surgical disciplines. 500lb weight capacity is standard and its all stainless steel construction enhances its looks and cleanliness. Self-diagnostic, one-handed controls and override features make manual backup systems obsolete. Accessories are available for all the above applications and are interchangeable with other Midmark model tables.

Contact MedRecon for pricing » Close
Shampaine 5100 B OR Table
Shampaine 5100 B OR Table
» More Information
  • Height Maximum 43"
  • Heigth Minimum 28"
  • Trendelenburg 20°
  • Reverse Trendelenburg 20°
  • Lateral Tilt 20°
  • 500lbs lift/ 400lbs articulation
  • Slide top 8"

The Shampaine 5100B is a remote controlled, C-Arm compatiable, full-function surgical table. It has a longitudinal slide for full-length image amplification and an x-ray cassette tunnel in each section. No table has greater C-arm accessibility for fluoroscopic procedures. The Shampaine 5100B is battery-powered. Its recharge system restores batteries to 80% of full charge within 6 hours and full charge within 12 hours

Contact MedRecon for pricing » Close

"Just wanted you to know that we LOVE our new Urogen table! We’ve been really impressed with how well you rebuilt this table! It is literally “brand new” at a fraction of the cost! When it’s time to purchase another table, we will without a doubt be using MedRecon!"


Joel Wilder
Administrator
Physicians Ambulatory Surgery Center (Ormond Beach, Florida)

"MedRecon provided quality service at a reasonable price with good turnaround time. The follow-up calls after the tables had been returned was a plus."


Paul Little
McGuire V.A. Medical Center (Richmond, Virginia)

"It has been 4 years since placing our first order for a remanufactured O.R. table. Due to that success, we had 3 additional tables remanufactured. MedRecon caught problems and potential hazards that other companies missed. We have been completely satisfied with the workmanship. The entire staff at MedRecon is knowledgeable, helpful and professional at all times. We will continue using MedRecon in the future."


Alison Ricco
Chestnut Hill Hospital (Philadelphia, Pennsylvania)

"MedRecon did an outstanding job of rebuilding our O.R. Tables - they were responsive to our inquiries and the turn around time was minimal."


Nancy Combs
John C. Lincoln Hospital (Phoenix, Arizona)

"The rebuild that you performed on our delivery room tables was excellent. The doctors and staff were very well pleased. It has been over one year since they were rebuilt and we have had no service calls on these units. Keep up the good work."


Neal Zabkar
Harlan Appalachian Regional Hospital (Harlan, Kentucky)

"It has been 4 years since placing our first order for a remanufactured O.R. table. Due to that success, we had 3 additional tables remanufactured. MedRecon caught problems and potential hazards that other companies missed. We have been completely satisfied with the workmanship. The entire staff at MedRecon is knowledgeable, helpful and professional at all times. We will continue using MedRecon in the future."


Alison Ricco
Chestnut Hill Hospital (Philadelphia, Pennsylvania)

"MedRecon did an outstanding job of rebuilding our O.R. Tables - they were responsive to our inquiries and the turn around time was minimal."


Nancy Combs
John C. Lincoln Hospital (Phoenix, Arizona)

"It has been 4 years since placing our first order for a remanufactured O.R. table. Due to that success, we had 3 additional tables remanufactured. MedRecon caught problems and potential hazards that other companies missed. We have been completely satisfied with the workmanship. The entire staff at MedRecon is knowledgeable, helpful and professional at all times. We will continue using MedRecon in the future."


Alison Ricco
Chestnut Hill Hospital (Philadelphia, Pennsylvania)

". . . MedRecon's impeccable service and professionalism makes us feel that we are not alone. Andy's (VP of Production) engineering acumen and years of technical experience is priceless. He talked a layman through diagrams and repairs from 7000 miles away! From the President to the office staff, the company has a "family" feel about it, imbued with honesty & integrity. MedRecon, Inc, in today's business world, is a real diamond!"


Dr. Eve Berman
(Maui, Hawaii)

"We are very pleased with our rebuilt OR table. The transaction was smooth and quick. Customer service was professional, informative, and supportive. Thanks!"


Becky Glascock
OR Supervisor
North Oaks Medical Center (Hammond, LA)

"We are very pleased with our rebuilt OR table. The transaction was smooth and quick. Customer service was professional, informative, and supportive. Thanks!"


Becky Glascock
OR Supervisor
North Oaks Medical Center (Hammond, LA)